Fast charging wallbox BE D - Scame E-Mobility
Breadcrumb
They are equipped with a cable with a CCS2 or CHAdeMO connector or two cables equipped with a CCS2 and a CHAdeMO connectors.
BE-D Modes
In other words, no explicit user identification is needed in order to e.g. start or stop charging sessions.
The built-in RFID card reader is therefore disabled
In other words, no explicit user identification is needed in order to e.g. start or stop charging sessions.
The built-in RFID card reader is therefore disabled BE-D Wall Boxes in FREE access mode are the ideal choice for installation in environments that do not require controlled access as usage is normally limited to a few people... View all +
Authentication can be managed with two alternative modes:
- User Cards authentication* (Net Local) | in this case the RFID reader is enabled
- Authentication monitored and controlled by a central station via OCPP 1.6. In this situation all the use cases typically featured by charging platforms, such as billing, charger reservations and remote identification via a mobile app are supported.
Authentication can be managed with two alternative modes:
- User Cards authentication* (Net Local) | in this case the RFID reader is enabled
- Authentication monitored and controlled by a central station via OCPP 1.6. In this situation all the use cases typically featured by charging platforms, such as billing, charger reservations and remote identification via a mobile app are supported. * The registration of authorized user cards is done directly in the Scame Management System of the single unit. The Wall Boxes in access mode with AUTHENTICATION are the final choice in all those cases where the plant must be monitored and managed remotely.... View all +
Download Area | BE-D
Download Area
- Installation Manual DC Wallbox BE-D (english)
- User Manual DC WallBox BE-D (english)
- Manaul de Instalazion DC Wallbox BE-D (español)
- Manual de Usuario DC Wallbox BE-D (español)
- Manuel d'Installation DC Wallbox BE-D (français)
- Manuel d'Emploi DC Wallbox BE-D (français)
- Manual de Instalação DC Wallbox BE-D (português)
- Manual do Utilizador DC Wallbox BE-D (português)
- Manual de Instalare DC Wallbox BE-D (român)
- Manual de utilizare DC Wallbox BE-D (român)
- Installationsmanual DC Wallbox BE-D (svenska)
- Användarmanual DC Wallbox BE-D (svenska)
- Installationshandbuch DC Wallbox BE-D (deutsch)
- Bedienunsanleitung DC Wallbox BE-D (deutsch)
- Installation Manual DC Wallbox BE-D (arabic)
- User manual DC Wallbox BE-D (arabic)
- Instruction sheet for assembly of support bracket for BE-D series DC Charging Station
- Instruction sheet for assembly-replacement of filter mats for BE-D series DC Charging Station
- Instruction sheet BE-D holder CCS2 e CHAdeMO [ZP91182]
Technical Sheet | BE-D
Wall Box Charging Station BE-D
Technical Sheet
Description
BE-D is a range of DC Power Wall Box charging stations with a power of 25 kW and equipped with a single cable with a CCS2 or CHAdeMO connector, or with two cables with a CCS2 and a CHAdeMO connector, fixed on specific wall supports when not in use.
The user interface is guaranteed by a TFT touch screen.
Available with access limited to a authorized users, the BE-D charging stations, equipped with Ethernet–WiFi-2/3/4G connectivity, can be monitored and managed remotely via the Scame Management System or they can be connected to an external E-Mobility Service Provider via a OCPP 1.6Json standard communication protocol.
Made of halogen-free technopolymer and embellished with a powder-coated aluminium frame, they are characterized by clean and essential lines, signed Trussardi+Belloni Design, the BE-D Charging Stations are the ideal choice in any context.
A specific support box in powder coated steel allows the installation on the ground.
Technical Characteristics
- Voltage rating : 230/400V ac
- Current rating : 40A ac
- Frequency : 50-60Hz
- Distribution system : 3P+N+PE
- Output connectors : CHAdeMO e/o CCS2
- Voltage output : 150-500 Vdc / 150-1000 Vdc
- Current output : max 60A dc
- Efficiency : 94%
- EMC Class : A
- Ingress protection rating : IP54
- Operationg temperature : -30/+45°C derating over +45°C
- Storage temperature : -30°C + 60°C
- Altitude: 2500 m max
- Humidity (non condesing) : da 5% a 95%
- Acustic noise : < 55 db
- Material : Varnished metal
- Glow wire test : -
- IK degree at 20°C : IK10
- Colour : Anthracite
- Mounting : Wall Mounting
- Saline solution : Resistant
- UV Rays : Resistente
- Dimensions (WxDxH) 594x252x794 mm
- Weight (approx.) 70 kg excluding the cables
Main functionalities and elements
- TFT 7" touch color display with motion sensor
- reader RFID MiFare Classic /Plus / DESFire
- local server wired with OCPP 1.6J protocol
- emergency stop button
- charging mode 4 CCS2 ro CHAdeMO
- identification of authorized user
- interfacing with OCPP Central Station
- predisposition for network connection
- working in a free access o identification access mode
Reference Standards
- IEC/EN 61851-1 (Electric vehicle conductive charging system. Part 1: General requirement.)
IEC/EN 61439-7 (Low-voltage switchgear and control gear assemblies. Part 7: Assemblies for e.v. charging stations. )
Versions
- With thetered charging cable and CHAdeMo output
- With thetered charging cable and CCS2 output
- With thetered charging cables and CCS2 or CHAdeMo outputs (Not simultaneous))
Wall Box Charging Station BE-D
Technical Sheet
OTHER PRODUCTS
Charging Solutions & Accessories
Asset Publisher
FAQ
Asset Publisher
Search FAQ
Here you can find all faqs